As mentioned, I got these great stretchy fabrics last week for 12.00 + 10.00 shipping from Fabulace
Each one is a about 1/2 yard or more – good sizes for sampling and making bodycon skirts or shirts. You should really check them out – this was a mixed selection but I just love everything in the shop!
So the day after I got the fabric my power went out and my phone died for about a day… no internets, no talkie, all alone… so I got creative and was determined to hand sew myself a cardigan.
Yes, I did it by hand, took a long time because I was photographing as I went but I think it would only take 1-11/2 hours if you can do a quick running stitch.
MATERIALS:
at least 1/2 yard of fabric for a medium – large sized cardigan
scissors
needle and thread
a sweater you already like (optional)
a making pen/chalk for fabric (honestly I used a regular pen but that’s dangerous)
pins

I chose a very soft stretchy jersey fabric that was about 1/2 a yard by 1 yard wide. Yours should be as wide as you would like the sleeves and as long as you would like the sweater.
I choose this orange sweater because it is so comfy and fits me great but I wanted the one I made to be shorter.

long enough!
Here is a paper that represents your fabric – the scribbled side is the outside of your sweater and the white will be the inside. So start with your fabric flat, outside facing you

Next, fold your fabric in, creating a triangle like making a paper airplane. The wrong side of your fabric should be on the outside now. It’s ok if the bottom ends aren’t perfectly lined up.

Then, fold in half once more so that the two opposite sides of the triangle meet and the open center part is covered in the middle now. Pin all the corners down.

Now, line half of your sweater up with the folded fabrics and spread a sleeve from the top end to the bottom corner.


Put a pin through your fabrics where the armpit is and where the sleeve ends. These will be your guide on where to sew your sleeves and arm holes.
Before you remove the sweater, also mark where the side is on the fabric. My orange sweater has a nice shape to it so I used that as a guide to cut later on my fabric.

you could also just measure your waist and divide by 4 for the correct width of the bottom and draw a straight line to the armpit pin to cut along later.
Remove the sweater and cut out that bottom right corner where you just places pins and marked the shape of the sweater leaving a 1/2″ perimeter.
You should have a shape that looks like half a sweater and when you unfold it once you should have a basic sweater outline

Now I cut off that excess from straight across the bottom.

and you can now do a simple running stitch along the undersides of the arms and the sides. I also hemmed the bottom and sleeves for a neater look but left the lapel parts alone so I could fold them out if I wanted.
And remmber that your fabric was inside out when you did all this so you will turn it right side out to hide the seams
tadaa!


i did actually make a pattern for this from paper after I figured it out


please don’t laugh at my primitive drawing tools